How To Refill Your Printer With Brother Ink?

If you are interested in how to refill the Brother printer, then let me explain you that brother printers itself not refilled. But, you refill their cartridge that runs up with regular usage. Keep in mind that every printer cartridge model has a different design. The procedure to refill also varies, therefore the manufacturer also gives user manual with the printer for refilling. With the passage of time, most of the people lost it. Don’t worry, this write-up, we will explain to you general instructions for refilling as well as specific details for some hot-selling models of brother ink. Now, let’s begin with them: 

Let’s Start With General Recommendation 1. When refilling the cartridge pay special attention to its internal part. Like, is there any crack or conductive flexible circuit intact.

2. Optimal refilling is required to be done immediately the ink runs out in the cartridge. Otherwise, the cartridge will have to undergo a long cleaning process, which does not always give a positive result.

3. Do not leave the cartridge in the open air without a special container or package because the package does not touch the nozzles of the cartridge. Therefore, there are high chances of its dried-up.

4. To refill, it is essential to use the same ink. In case of any confusion, you can take help from the company that sells the same type of ink.

5. Prepare the workplace. If you are filling ink for the first time, then it is highly desirable to keep rubber gloves and newspaper with you. Because there is some aggressive ink that can make permanent imprints on your skin. Although you can wash them. If you have a container for carrying the cartridge, then you are lucky - it is a little more convenient with it. Buy a disposable syringe for 10-20ml.

6. In most cases, it is recommended to seal the cartridge nozzles with adhesive tape. But this is not obligatory to use adhesive tape only. The main motive of using it is to save ink flow. Therefore, you can use any brand adhesive tape 

Now Let's Proceed With The Description of Refuelling Process

• Brother LC-02

1. Place the cartridge with the cap up.
2. Remove the cover by prying with a knife or a flat-head screwdriver.
3. Make a hole in the place where it will be convenient to seal it or remove the foil later. The hole can be made with an awl, a thin screwdriver or a knife. Be careful not to hurt your hands. 4. Fill the foam with 10ml of ink of the corresponding colour. Seal the hole. 5. If the cartridge does not leak, it can be used. If the cartridge does not print several lines then clean it by using special printer utility tools.

• Brother LC-900

1. Position the cartridge with the nozzles facing down. 2. Make a hole in the top cover of the cartridge (exactly in the middle). The hole can be made with an awl, a thin screwdriver or a knife. Be careful not to hurt your hands. 3. Fill a syringe with a needle of 20-25ml of ink of the corresponding colour through the hole. 4. Cover the hole with tape for reliability you can grease the edges of the hole with superglue. 5. If the cartridge does not leak it can be used. If the cartridge does not print well than check its adequate setting and reinstall it in the printer.

• Brother LC-600

1. Place the cartridge with the cap up. 2. Remove the cover by prying with a knife or a flat-head screwdriver. 3. Make a hole in the place where it will be easy to seal or remove the cover later. You can use a knife of a think screwdriver for this. 4. Fill it with 10ml of the same colour ink and then seal it. 5. If every step is successfully completed then check the cartridge leakage. If everything is ok and still the cartridge is not working then clean it using printer properties. 

Bottom Line

Hope, the above clarification help you solve your refilling issues. If you apply this procedure on your similar models of printer cartridges, this can save your money from buying a new brother ink cartridge. In a general survey, it seemed that you can refill a cartridge three times, so why not save your money three times. In addition, you are also shaking hand for environment safety.